Go to Main text Go to Main Menu

TRILOY® 540

PC/ASA

Inquiry

TYPICAL DATA OF TRILOY® 540 GRADE

PROPERTY UNIT ASTM METHOD TYPICAL DATA
Physical
Specific Gravity - D792 1.16
Water Absorption (24 hours at 23℃) % D570 0.2
Melt Flow Rate (260℃, 5kg) g/10min D1238 8
MECHANICAL
Tensile Strength at yield kgf/㎠ D638 350
Tensile Elongation at break % D638 60
Flexural Strength at yield kgf/㎠ D790 500
Flexural Modulus kgf/㎠ D790 16,000
Izod Impact Strength, notched, 23℃ (1/8”) kgf∙㎝/㎝ D256 30
Rockwell Hardness R scale D785 117
THERMAL
HDT, 18.6 ㎏f/㎠ D648 100
ELECTRICAL
OTHERS
Mold Shrinkage (3mm thickness) % D955 0.5~0.7
※The figures listed in this table are typical values obtained under the standard test methods and may not be applicable for products that are under different application condition.

PROCESSING GUIDE FOR TRILOY® 540 GRADE

General processing conditions for TRILOY® 540 are shown below.
Drying prior to processing is essential to ensure desired appearance and property performance.

SPECIFICATION UNIT CONDITIONS
Drying Temperature 100~110
Drying Time hr 4~6
Moisture Content, Max % 0.02
Melt Temperature 260~270
Nozzle Temperature 260~270
Front Temperature 260~270
Middle Temperature 260~270
Rear Temperature 250~260
Mold Temperature 80~110