Go to Main text Go to Main Menu

TRAMID® 4111U

PA6

Inquiry

TYPICAL DATA OF TRAMID® 4111U GRADE

PROPERTY UNIT ASTM METHOD TYPICAL DATA
Physical
Specific Gravity - D792 1.10
MECHANICAL
Tensile Strength at yield kgf/㎠ D638 620
Tensile Elongation at break % D638 40
Flexural Strength at yield kgf/㎠ D790 840
Flexural Modulus kgf/㎠ D790 20,000
Izod Impact Strength, notched, 23℃ (1/8”) kgf∙㎝/㎝ D256 14
THERMAL
HDT, 18.6 ㎏f/㎠ ℃ D648 55
ELECTRICAL
OTHERS
※The figures listed in this table are typical values obtained under the standard test methods and may not be applicable for products that are under different application condition.

PROCESSING GUIDE FOR TRAMID® 4111U GRADE

General processing conditions for TRAMID® 4111U are shown below.
Drying prior to processing is essential to ensure desired appearance and property performance.

SPECIFICATION UNIT CONDITIONS
Drying Temperature ℃ 80~90
Drying Time hr 3~5
Moisture Content, Max % 0.2
Melt Temperature ℃ 240~260
Nozzle Temperature ℃ 250~270
Front Temperature ℃ 250~270
Middle Temperature ℃ 250~270
Rear Temperature ℃ 230~250
Mold Temperature ℃ 50~80