Go to Main text Go to Main Menu

TRILFT® LF9080G40

PP + Long Glass Fiber

Inquiry

TYPICAL DATA OF TRILFT® LF9080G40 GRADE

PROPERTY UNIT ASTM METHOD TYPICAL DATA
Physical
Specific Gravity - D792 1.20
MECHANICAL
Tensile Strength at yield kgf/㎠ D638 1,350
Flexural Strength at yield kgf/㎠ D790 1,850
Flexural Modulus kgf/㎠ D790 85,000
Izod Impact Strength, notched, 23℃ (1/8”) kgf∙㎝/㎝ D256 23
THERMAL
HDT, 4.6 ㎏f/㎠ 160
ELECTRICAL
OTHERS
Mold Shrinkage % 0.2~0.6
※The figures listed in this table are typical values obtained under the standard test methods and may not be applicable for products that are under different application condition.

PROCESSING GUIDE FOR TRILFT® LF9080G40 GRADE

General processing conditions for TRILFT® LF9080G40 are shown below.
Drying prior to processing is essential to ensure desired appearance and property performance.

SPECIFICATION UNIT CONDITIONS
Drying Temperature 80~100
Drying Time hr 3~5
Moisture Content, Max % 0.02
Melt Temperature 210~230
Nozzle Temperature 220~230
Front Temperature 210~220
Middle Temperature 210~220
Rear Temperature 200~210
Mold Temperature 40
Screw Speed rpm <50
Vent Depth mm 0.02~0.05