Go to Main text Go to Main Menu

TRAMID® 4210G50HU

PA66 GF50

Inquiry

TYPICAL DATA OF TRAMID® 4210G50HU GRADE

PROPERTY UNIT ASTM METHOD TYPICAL DATA
Physical
Specific Gravity - D792 1.56
MECHANICAL
Tensile Strength at yield kgf/㎠ D638 2,250
Tensile Elongation at break % D638 2
Flexural Strength at yield kgf/㎠ D790 3,340
Flexural Modulus kgf/㎠ D790 135,000
Izod Impact Strength, notched, 23℃ (1/8”) kgf∙㎝/㎝ D256 14
THERMAL
HDT, 18.6 ㎏f/㎠ ℃ D648 258
ELECTRICAL
OTHERS
※The figures listed in this table are typical values obtained under the standard test methods and may not be applicable for products that are under different application condition.

PROCESSING GUIDE FOR TRAMID® 4210G50HU GRADE

General processing conditions for TRAMID® 4210G50HU are shown below.
Drying prior to processing is essential to ensure desired appearance and property performance.

SPECIFICATION UNIT CONDITIONS
Drying Temperature ℃ 80~100
Drying Time hr 3~5
Moisture Content, Max % 0.2
Melt Temperature ℃ 270~290
Nozzle Temperature ℃ 270~290
Front Temperature ℃ 270~290
Middle Temperature ℃ 260~290
Rear Temperature ℃ 220~260
Mold Temperature ℃ 80~100