본문 바로가기 대메뉴 바로가기

TRAMID® 4110

PA6

咨询

TYPICAL DATA OF TRAMID® 4110 GRADE

PROPERTY UNIT ASTM METHOD TYPICAL DATA
Physical
Specific Gravity - D792 1.13
Water Absorption (24 hours at 23℃) % D570 1.1
Melt Flow Rate (260℃, 2.16kg) g/10min D1238 55
MECHANICAL
Tensile Strength at yield kgf/㎠ D638 800
Tensile Elongation at break % D638 40
Flexural Strength at yield kgf/㎠ D790 1,000
Flexural Modulus kgf/㎠ D790 28,000
Izod Impact Strength, notched, 23℃ (1/8”) kgf∙㎝/㎝ D256 5
THERMAL
HDT, 18.6 ㎏f/㎠ ℃ D648 60
ELECTRICAL
OTHERS
Mold Shrinkage (3mm thickness) % D955 1.4 ~ 1.8
※The figures listed in this table are typical values obtained under the standard test methods and may not be applicable for products that are under different application condition.

PROCESSING GUIDE FOR TRAMID® 4110 GRADE

General processing conditions for TRAMID® 4110 are shown below.
Drying prior to processing is essential to ensure desired appearance and property performance.

SPECIFICATION UNIT CONDITIONS
Drying Temperature ℃ 70~80
Drying Time hr 5~7
Moisture Content, Max % 0.25
Melt Temperature ℃ 270~290
Nozzle Temperature ℃ 270~300
Front Temperature ℃ 270~300
Middle Temperature ℃ 260~290
Rear Temperature ℃ 220~260
Mold Temperature ℃ 20~70
Back Pressure MPa 0.0~0.1
Screw Speed rpm 10~50
Vent Depth mm 0.02~0.08