본문 바로가기 대메뉴 바로가기

TRILOY® 180

PC/PBT (Non-Painting)

咨询

TYPICAL DATA OF TRILOY® 180 GRADE

PROPERTY UNIT ASTM METHOD TYPICAL DATA
Physical
Specific Gravity - D792 1.22
Water Absorption (24 hours at 23℃) % D570 0.15
Melt Flow Rate (250℃, 5kg) g/10min D1238 32
MECHANICAL
Tensile Strength at yield kgf/㎠ D638 620
Tensile Elongation at break % D638 120
Flexural Strength at yield kgf/㎠ D790 880
Flexural Modulus kgf/㎠ D790 22,500
Izod Impact Strength, notched, 23℃ (1/8”) kgf∙㎝/㎝ D256 60
THERMAL
HDT, 18.6 ㎏f/㎠ D648 110
ELECTRICAL
OTHERS
Mold Shrinkage (3mm thickness) % D955 0.7~1.2
※The figures listed in this table are typical values obtained under the standard test methods and may not be applicable for products that are under different application condition.

PROCESSING GUIDE FOR TRILOY® 180 GRADE

General processing conditions for TRILOY® 180 are shown below.
Drying prior to processing is essential to ensure desired appearance and property performance.

SPECIFICATION UNIT CONDITIONS
Drying Temperature 90~100
Drying Time hr 3~4
Moisture Content, Max % 0.02
Melt Temperature 250~270
Nozzle Temperature 260~280
Front Temperature 260~280
Middle Temperature 240~260
Rear Temperature 230~250
Mold Temperature 50~70
Back Pressure MPa 0.3~0.7
Screw Speed rpm 30~70
Vent Depth mm 0.02~0.08