본문 바로가기 대메뉴 바로가기

TRAMID® 4710PN2

PA Transparent

咨询

TYPICAL DATA OF TRAMID® 4710PN2 GRADE

PROPERTY UNIT ASTM METHOD TYPICAL DATA
Physical
Specific Gravity - D792 1.02
Water Absorption (24 hours at 23℃) % D570 0.3
MECHANICAL
Tensile Strength at yield kgf/㎠ D638 590.0
Flexural Strength at yield kgf/㎠ D790 16200.0
Izod Impact Strength, notched, 23℃ (1/8”) kgf∙㎝/㎝ D256 5.0
Rockwell Hardness R scale D785 120.0
THERMAL
HDT, 18.6 ㎏f/㎠ D648 115.0
ELECTRICAL
OTHERS
Mold Shrinkage (3mm thickness) % D955 0.8~1.0
※The figures listed in this table are typical values obtained under the standard test methods and may not be applicable for products that are under different application condition.

PROCESSING GUIDE FOR TRAMID® 4710PN2 GRADE

General processing conditions for TRAMID® 4710PN2 are shown below.
Drying prior to processing is essential to ensure desired appearance and property performance.

SPECIFICATION UNIT CONDITIONS
Drying Temperature 75~85
Drying Time hr 4~6
Melt Temperature 230~250
Nozzle Temperature 240~260
Front Temperature 240~260
Middle Temperature 240~260
Rear Temperature 220~240
Mold Temperature 60~100(80)