본문 바로가기 대메뉴 바로가기

TRAMID® 4210G30HU

PA66 GF30

咨询

TYPICAL DATA OF TRAMID® 4210G30HU GRADE

PROPERTY UNIT ASTM METHOD TYPICAL DATA
Physical
Specific Gravity - D792 1.37
MECHANICAL
Tensile Strength at yield kgf/㎠ D638 1,900
Tensile Elongation at break % D638 2
Flexural Strength at yield kgf/㎠ D790 2,750
Flexural Modulus kgf/㎠ D790 95,000
Izod Impact Strength, notched, 23℃ (1/8”) kgf∙㎝/㎝ D256 9
THERMAL
HDT, 18.6 ㎏f/㎠ D648 254
ELECTRICAL
OTHERS
※The figures listed in this table are typical values obtained under the standard test methods and may not be applicable for products that are under different application condition.

PROCESSING GUIDE FOR TRAMID® 4210G30HU GRADE

General processing conditions for TRAMID® 4210G30HU are shown below.
Drying prior to processing is essential to ensure desired appearance and property performance.

SPECIFICATION UNIT CONDITIONS
Drying Temperature 80~100
Drying Time hr 3~5
Moisture Content, Max % 0.2
Melt Temperature 270~290
Nozzle Temperature 270~290
Front Temperature 270~290
Middle Temperature 260~290
Rear Temperature 220~260
Mold Temperature 80~100